Good evening dear students:
As I promised, here is your first assignment. Watch the video carefully then write 2 or 3 danger situation that Napo are dealing with.
Make your comments in English.
As I promised, here is your first assignment. Watch the video carefully then write 2 or 3 danger situation that Napo are dealing with.
Make your comments in English.
Name: Swaby Ileana
ResponderEliminarID: 8-909-466
In the video I could see the different dangers, the worker did not wear the appropriate uniform, he doesn't wear gloves, protective glasses.
The cable of the artefactor that was using was not in good condition.
The worker when unplugging the artefactor made it from the cable not from the plug.
The collaborator worked with energy and did not completely close the switch box.
Edilberto Alexander Torres
ResponderEliminarID :8-856-1441
Analyzing the video I could observe the following situations in which Napo was. These were:
1 when cutting with the Napo saw does not realize that the cable is below the table that is cutting passing over the cable which causes a strong electric impact on.
2 when using Napo the vacuum cleaner disconnects the same pulling the cable causing the connection to peel from the point where it is connected and the next time Napo was going to use the vacuum cleaner when it is going to connect it happens a strong impact of current product of the evil Use of equipment.
3 when using Napo the drill reaches the point where the cables were in operation interfering which produces a strong impact of current and in turn the connection was bare which falls on it and receives a second electric impact.
VIELKA GONZALEZ 5-711-151 According to the analysis I made of the video, I could see that in most situations, emphasis is placed on what is the electrical risk, as an example: when Napo relates the activity to the drill, when it cuts The wood and when the forklift carries materials, it is seen the situation that the relevant safety measures are not taken and in addition this is not emphasized in the maintenance of tools and connections of electrical supplies. And I also noticed something that we have to take into account in the whole industry what is the blocking and labeling of the machinery, when it is going to give the maintenance, because if these measures are not followed the carelessness can lead to fatal accidents.
ResponderEliminarVIELKA GONZALEZ 5-711-151 According to the analysis I made of the video, I could see that in most situations, emphasis is placed on what is the electrical risk, as an example: when Napo relates the activity to the drill, when it cuts The wood and when the forklift carries materials, it is seen the situation that the relevant safety measures are not taken and in addition this is not emphasized in the maintenance of tools and connections of electrical supplies. And I also noticed something that we have to take into account in the whole industry what is the blocking and labeling of the machinery, when it is going to give the maintenance, because if these measures are not followed the carelessness can lead to fatal accidents.
ResponderEliminar
ResponderEliminarNapo is exposed to multiple electrostatic hazards, in the different jobs they do and in the sea by directly charging the jobs they do with electricity.
Among them we can mention the classic electric extensions that have many drawings and popular bare wires and without leaving behind the boxes without their respective covers.
Also it is possible to emphasize the blockades that are made in the industry which each worker has to put its padlock to carry out its works.
Also the fuels that are stored near the heat or some spark which are a serious danger.
Which as a security manager I recommend taking the precautionary measures necessary to avoid an accident at work.
Lilia D'meza
ResponderEliminarThe video shows a series of electrical hazards due to lack of knowledge of safety regulations.
There is a series of events that put at risk the physical integrity of the employee and the people around him that could have been avoided with adequate training and knowledge of the activity carried out.
That is why it is important to hire suitable personnel to carry out risky activities and that they have the right equipment.
Name: Luis Porras
ResponderEliminarID: 8-899-878
Case #1:
The tractor driver did not respect the minimum security distance or the warning call of Napo when he passed under the electrical lines, so the tractor gets energized. Once again he decided to ignore Napo and gets out of the only thing that was protecting his life: the tractor. The consequency of his behavior was electrocution.
Case #2:
While Napo welds it realizes that the gas tank is near its work area and it transports it serca of the current outlet and it explodes.
Case #3:
The maintenance staff makes the revision of the production machine the electrician puts his safety lock, minutes later the mechanical area arrives and sees the safety lock of the electric and does not put his safety lock, the electric do not Realizes that the mechanic inside the machine and starts the machine.
Name: Catherine Cedeño
ResponderEliminarID 1-730-2122
In the video I could see different hazards to which Napo was exposed, since he worked without the personal protection equipment.
The cables do not meet the safety standards because they are spliced and peeled this is the reason of an electrical risk, this caused an electric short.
The worker unplugged the device from the cable and not from the socket where other devices were connected.
Was working with high voltage energy and did not close the switch panel box.
When I did not cut with the saw I did not check that the cable was under the table that was cutting the pass over the cable that causes an electric shock.
Name: Catherine Cedeño
ResponderEliminarID 1-730-2122
In the video I could see different hazards to which Napo was exposed, since he worked without the personal protection equipment.
The cables do not meet the safety standards because they are spliced and peeled this is the reason of an electrical risk, this caused an electric short.
The worker unplugged the device from the cable and not from the socket where other devices were connected.
Was working with high voltage energy and did not close the switch panel box.
When I did not cut with the saw I did not check that the cable was under the table that was cutting the pass over the cable that causes an electric shock.
Name: Ariela Zamora
ResponderEliminarID: 8-902-946
In the video of Napo, shows us many situations of risk in which in many occasions some rules of prevention were ignored as it was in the case of
The overload on one of the boards that Napo used to do some work.
In another case Napo did not know how to properly use the extensions of electricity, in which at one time a door opening and closing it contributed to the isolation of the extension being damaged and thus causing an accident.
Aidza Martínez
ResponderEliminar3-718-1061
In the video you can observe different situations of electrical danger to which Napo is exposed
situation # 1
in bad conditions splices without adequate coating
situation #2
While Napo is soldering occurs the overheating of electrical extension because it was not unwound with the existence of flammable material the contact with the sparks cause this material to react causing explosion
situation #3
The driver of heavy equipment does not keep the proper distance between this and the energized lines of medium voltage which causes electrocution of the equipment later of the worker when leaving the machine
Name: Jaime Gutierrez
ResponderEliminarID: 8-922-1671
In the video it can be clearly seen that in several of the situations presented, it is seen that Napo did not use the adequate protection equipment to carry out the works.
Also did not have any type of signage at the time of doing a job.
For example in the part where the companion of Napo is reiparing the machinen, it was necessary to place a tape of signaling that indicated that it was damaged so that did not happen what happened to Napo.
Another example whem the person was with the truck was due to him to have said from the begining that he was careful with the electrical wiring.
Another situaction of risk, is that Napo never noticed in the cables, when it was going to use a equipment.
What is clear to me from this video is that we must be careful when carrying out any activity to avoid accidents.
The situations I see in this video are:
ResponderEliminar1. Napo does not use the correct personal protective equipment.
2. Napo does not use signs at the time he is going to work.
3. Napo does not check his tool before working.
4. Napo does not have proper occupational health and safety training
Joel Jaèn 8-909-1135
Militza Escobar 8-925-1880
ResponderEliminarIn all the situations there is a great lack of safety. The worker uses neither suitable uniform nor equipment of protection for example gloves, boots with insulating electrically, does not clean his area of work, does not take previous measurements of safety, it is possible that it is not experienced and of to being this way a debit to be a supervisor or safety manager, these are the problems that in real life finish with the lives of our workers.
Yaqueline Guerra
ResponderEliminar8805-135
The videos show different accidents that occur when not maintaining the preventive measures when manipulating the electricity, the deaths by electrocutation or losses of anatomical pieces to the moments of a discharge enters our body. Appliance wires must be in good condition such as keeping the area clean without spiling liquid and keeping ot clear to work on it.
JUAN CARLOS BARRIOS
ResponderEliminar8-879-2378
Napo was a worker who did not take the necessary precaution at the time of work, taking both the person and the person as much as the other people, so that the risks and accidents that occurred were with electric current. Napo never took advice or conscience of the way of work occurred to him different accident accident cn the extensions that you used the overloads every worker at the time of work must review his work weapon that is in good condition to be able to use it.
Cindy Movilla Molina
ResponderEliminarAR488393
In this case I saw differents situations where Napo was a bad worker because he never followed the safety instructions for do a good job and protect to him.
He never use safety equipment like gloves, glasses and safety helmet and this was too dangerous because he was electrocuted on different occasions. He sometimes used Flammable product near to electrical cables in consecuency he injured his boss
Leonidas camaño 8-716-2354. 1Connection in poor condition,wet foor .was no the signaled area. 2 of order and cleanliness. 3. The Electric foot that had all its safety equipment.like the padlock . The operator did not have theknowledge of the security lock.
ResponderEliminarLeonidas camaño 8-716-2354. 1Connection in poor condition,wet foor .was no the signaled area. 2 of order and cleanliness. 3. The Electric foot that had all its safety equipment.like the padlock . The operator did not have theknowledge of the security lock.
ResponderEliminarVivian Domínguez 8-920-2386
ResponderEliminarIn this vide, I can see how many cases occur when you don't use in correct form the tools or equipment to work.
#1: Thee rule to be able to connect more appliances was overheated for the demand of high voltage in the same one.
#2: Of a lamp chimney fixed to ceiling a connection of cable goes out with current to feed other appliances. This produces small blackouts in the lamp chimney.
#3: It is possible to observe easily the presence of voltage out of the connections in a box fixed to the local wall where they working.
Jackeline Osorio ID-2-729-1058
ResponderEliminarAfter observing the napo videos, we have many observations about the subject of occupational safety.
Napo does not use the appropriate safety equipment for the work performed.
It also carries out unsafe acts which cause accidents.
Perform different jobs with defective tools.
When working in machines does not carry out procedure of blocking and labeling.
It has no training in risk prevention and in the proper use of tools.
Bolivar Pino ID 8-767-736
ResponderEliminarAfter View Napo´s Shocking Situations videos.
This dangerous situation I can mention from it:
Misuse of Electrical Fixtures and Appliances
Fixtures and house appliances are the most common causes of electrical accidents in your home or at your workplace, especially when misused.
Wetness of Areas with Electrical Circuits
Water is an excellent conductor of electricity, a while operating electrical equipment as Napo is doing may result in serious electrical accidents such as electrical shocks, burns, and may lead to electrical fires. Therefore, to avoid electrical accidents from wet areas you should fix ground-fault circuit interrupter in the kitchen, bathrooms, outdoors, garages and in any other area around your home or workplace that can possibly get wet.
Naked Cords and Plugs
Naked electrical cords and plugs are the most common cause’s fatal electrical accidents over years, using electrical cables that are not insulated, loose or exposing electric plugs and cords to water is very dangerous it may lead to burns, shocks or electrical fires. To ensure you are safe from electrical shocks, you should put in place preventive measures such as avoiding the use of naked plugs or cords. Also, replace any cord that is not insulated or has come loose from the plug never use a cord with that has been repaired with electrical tape.